GE WD21X10490 Dishwasher Door Latch Assembly | Genuine OEM | Alt: 265D1214G001 | New Factory-Sealed

✅ Genuine OEM | New Factory-Sealed | Part #WD21X10490 | Alt: 265D1214G001 | Compare at $34.99

If your GE dishwasher door won’t latch, starts mid-cycle, or the control board won’t recognize the door as closed, the door latch assembly is almost always the culprit. The GE WD21X10490 Door Latch Assembly is the genuine OEM replacement that ensures your dishwasher door locks securely, activates the door interlock switches, and signals the control board that it’s safe to run a cycle — all without the fit-tolerance risk of an aftermarket substitute.

🔧 Key Details

• Genuine OEM part — manufactured by GE (General Electric) to factory specifications; the same component used in original GE and Hotpoint dishwasher builds
• Part number WD21X10490 — internal stamping reference: 265D1214G001; verify against your model’s parts list before ordering
• Heavy-duty industrial plastic construction — built to withstand repeated open/close cycles and the heat and humidity of a running dishwasher
• New, factory-sealed — new genuine OEM in original manufacturer poly-bag with SKU label; electrical contact points protected from moisture and dust
• Compare at $34.99 — priced at $19.95 as a liquidation find; same genuine OEM part at a lower cost
• Ships within 1 business day — dispatched from Burlington, KY via FREE USPS Ground Advantage with full tracking

📋 Part Specifications

• Brand: GE (General Electric) — Genuine OEM
• Primary Part Number (MPN): WD21X10490
• Internal Stamp / Alt Reference: 265D1214G001
• Component Type: Door Latch / Door Interlock Assembly
• Material: Heavy-duty industrial plastic
• Compatibility: Fits specific GE, Hotpoint, and compatible dishwasher models — verify your model number before ordering
• Qty Included: 1x Door Latch Assembly
• Condition: New, Genuine OEM, factory poly-bag sealed

🛠️ Installation Notes

1. Verify compatibility first: Confirm WD21X10490 (or 265D1214G001) matches your specific GE or Hotpoint dishwasher model’s parts list before ordering.
2. Disconnect power and water: Turn off the circuit breaker and shut off the water supply to the dishwasher before beginning any repair.
3. Remove the dishwasher’s inner door panel to access the existing latch assembly.
4. Photograph the wire harness connections on the old latch before disconnecting anything so you can replicate the wiring exactly on the new part.
5. Disconnect the wire harness from the old latch, remove it, install the new WD21X10490 assembly, and reconnect all leads.
6. Consult your appliance’s service manual for model-specific torque specs and wiring diagrams. If unsure, hire a certified appliance technician.
7. Store in original sealed poly-bag in a clean, dry area until installation to protect electrical contacts.

👤 Who It’s For

• DIY appliance repair customers with a GE or Hotpoint dishwasher that won’t latch, won’t start, or loses its cycle mid-run due to a faulty door latch
• Appliance repair technicians sourcing genuine OEM door latch assemblies at liquidation pricing
• Anyone whose dishwasher control board isn’t receiving the “door closed” signal needed to begin or continue a wash cycle

⚠️ Safety Notes

• Disconnect all power and water before installation. Never work on a live dishwasher.
• Do not attempt installation without confirming part compatibility with your specific model number.
• If you are not experienced with appliance repair, consult a certified appliance technician.

❓ Frequently Asked Questions

Q: Is this a genuine GE part or an aftermarket substitute?
A: 100% genuine GE OEM — sourced from original manufacturer poly-bag packaging with part number WD21X10490 confirmed. Not aftermarket.

Q: What is the alternate part number 265D1214G001?
A: 265D1214G001 is the internal stamping reference on the same component. Both numbers identify this exact latch assembly — use either to confirm compatibility with your model.

Q: How do I know if this fits my dishwasher?
A: Look up your GE or Hotpoint dishwasher’s model number on GEAppliances.com or a parts lookup site and confirm WD21X10490 is listed for your model before ordering.

Q: Is the part new or used?
A: New and factory poly-bag sealed. Electrical contact points are protected. This part has never been installed or used.

Q: Why is the price lower than retail?
A: Liquidation find — genuine OEM, new in original packaging, sourced through secondary retail channels. Same part, lower cost.

More4less Outlet is an independent retail liquidator, not affiliated with or endorsed by GE or General Electric. All trademarks belong to their respective rights holders. Authentic OEM parts resold legally under the First Sale Doctrine (17 U.S.C. § 109).